Casement Doors
Side-hung leaves compressing onto their gaskets when shut, giving the tightest seal against dust, driven rain and street noise.
Manufacturer, Not Reseller
Aluminium Door Manufacturer
Alurac manufactures aluminium doors from its Ghaziabad facility, specifying the section, fabricating the unit and installing it with its own team. Casement, sliding, tilt and turn, folding, lift and slide, slim, automatic, bathroom and gate systems, all made to the measured opening.
- 9 Door Categories
- Sections to Installation In House
- Itemised Quotations
- After-Sales Support
Alurac Windoz
5,000+Residences enhanced with Alurac systems
300+Commercial projects completed
1,000+Happy clients, architects & builders
9Door categories manufactured
Who Manufactures Alurac Aluminium Doors?
Alurac Architectural Windoz is an aluminium door manufacturer based on Grand Trunk Road, Bulandshahr Road Industrial Area, Ghaziabad, Uttar Pradesh. The company specifies and supplies the aluminium sections, fabricates the units in its own workshop, and installs them with its own trained team.
The range covers casement, sliding, tilt and turn, slide and fold, lift and slide, slim profile, automatic, bathroom and shower doors, along with gates and entrance leaves. Supply and installation reach Delhi NCR, Uttar Pradesh, Haryana, Rajasthan and Uttarakhand. For a measured quotation, call +91-9312500138 or email info@alurac.in.
Worth Checking Before You Buy
Not Everyone Selling Aluminium Doors Makes Them
The word manufacturer gets used loosely in this trade. Plenty of businesses selling aluminium doors are buying finished units and reselling them, or assembling sections bought from somebody else. Both are legitimate ways to trade, and neither is a problem until something needs changing or fixing.
That is when it matters. A reseller cannot alter how a door was built, and a fabricator who does not install can point at the fitting when a door does not seal. When the section, the fabrication and the installation sit with one company, there is no gap between parties for a problem to fall into.
- Sections specified for the job rather than taken from whatever is in stock.
- Fabrication in our own workshop, with frames checked square before glazing.
- Installation by our own trained team, not outsourced labour.
- Quotations itemising profile, glass, hardware and installation separately.
- Service and adjustment after handover, handled by the people who fitted it.
Our Range
Aluminium Doors We Manufacture
Nine door categories, every one fabricated to the measured opening rather than supplied as a stock size.
Sliding Doors
Leaves running on rollers inside a tracked frame, needing no swing space. The most widely used door across Indian homes.
Tilt and Turn Systems
One handle giving two positions, tilted for secure ventilation or swung fully open for access and cleaning.
Slide and Fold Systems
Multi-leaf sets folding and stacking aside, clearing almost the whole opening onto a lawn, deck or terrace.
Slim and Lift Slide Doors
Narrow sightline sliding and geared lift and slide systems for large panes that still operate easily and seal under compression.
Automatic Doors
Sensor-operated sliding, swing and revolving entrances for showrooms, clinics, hotels and office lobbies.
Bathroom and Shower Doors
Framed, semi-frameless and sliding enclosure leaves finished to handle permanent humidity and cleaning chemicals.
Gates and Entrance Leaves
Swing, sliding, louvre and panel gates finished to match the elevation, so the entrance reads as one designed piece.
Interior and Partition Doors
Slim openable, telescopic sliding and glass partition leaves for cabins, studies and meeting rooms.
In-House Capability
From Measurement to Installation
Four stages, all handled by one company rather than split across three.
1. Survey and Measurement
Openings are measured on site before anything is quoted, so the rate reflects the real work rather than a drawing that the building may not have followed.
2. Profiles and Sections
The section itself is specified and supplied in house, which means wall thickness, gasket grooves and drainage are chosen for the job rather than inherited from whatever was in stock.
3. Fabrication
Cutting, machining, assembly, gasketing and glazing are carried out in our own workshop, where frames are checked for square before they are glazed.
4. Installation and After-Sales
Fitting, sealing and finishing are done by our own trained team, followed by service and adjustment after handover rather than a handover and silence.
Buyer's Guide
How to Choose an Aluminium Door Manufacturer
Six checks worth making before placing an order with anyone, including us.
Ask for the Section Spec in Writing
Profile series and wall thickness should be stated on the quotation. A manufacturer confident in its product puts the number down. A seller competing on rate usually does not.
Check Who Actually Makes It
Many businesses selling aluminium doors buy finished units and resell them. That is a legitimate trade, but it means the person you deal with cannot change anything about how the door was built.
Confirm Who Installs
A door is only as good as its fitting. When fabrication and installation sit with different parties, a problem at the junction between them becomes nobody's responsibility.
Get the Hardware Named
Handles, rollers, stays and locking should be named by brand and grade on the quote. Unnamed hardware is where a surprisingly low rate is usually recovered.
Insist on an Itemised Quotation
Profile, glass, hardware and installation listed separately is what makes two offers comparable. A single lump sum hides every decision that matters.
Ask What Happens After Handover
Doors need occasional adjustment in their first year. Find out before ordering whether that is part of the service or a new conversation each time.
Know the Difference
Manufacturer, Fabricator or Dealer?
Who does what, and where accountability sits when something needs putting right.
| Consideration | Manufacturer | Fabricator | Dealer |
|---|---|---|---|
| Specifies the section | Yes | Sometimes, within what is available | No |
| Assembles the unit | Yes, in house | Yes | No |
| Installs on site | Usually, with own team | Sometimes | Often through a third party |
| Can change the build | Yes, at specification stage | Partly | No |
| Handles after-sales | Directly | Usually for fabrication faults | Passes it up the chain |
| Where accountability sits | One company throughout | Split with whoever installs | Split across the supply chain |
A dealer or fabricator can supply excellent doors. The difference shows when something needs changing or correcting, because only a manufacturer controls every stage.
Who We Supply
Who We Manufacture For
From a single replacement opening to a phased project supply.
Homeowners
Single openings, full-house replacements and renovation work, handled with the same measurement and assembly standard as a project order.
Builders and Developers
Project quantities fabricated and dispatched in phases against the construction programme rather than arriving all at once.
Architects and Consultants
Section drawings, sightline information and finish samples at specification stage, so a drawn detail is one that can actually be built.
Dealers and Distributors
Fabricated units supplied ready to install for dealers who sell and fit but do not run a workshop of their own.
Commercial and Hospitality
Showrooms, offices, hotels and clinics, where doors are operated continuously and hardware grade matters more than it does at home.
Institutions and Industry
Schools, hospitals, factories and warehouses, where openings take daily rough use and durability outranks appearance.
Where We Supply
Supply and Installation Coverage
Manufactured in Ghaziabad, supplied and installed across these cities and the districts around them.
- Ghaziabad
- Noida
- Greater Noida
- Delhi
- Gurugram
- Faridabad
- Meerut
- Sonipat
- Lucknow
- Kanpur
- Agra
- Jaipur
- Dehradun
- Haridwar
- Hapur
- Bulandshahr
- Bahadurgarh
- Modinagar
City not listed? We supply more widely on project quantities. Just tell us your location and we will confirm what is workable.
How We Work
From Enquiry to Fitted Door in Five Steps
The same process whether it is one door or every opening in a building.
01
Book a Consultation
Call, WhatsApp or send an enquiry and we schedule a convenient slot.
02
Share Your Opening
Openings are measured on site and your priorities are noted.
03
Specification & Quote
System, glass, finish and hardware are proposed with an itemised quotation.
04
Fabrication & Fitting
Made to the measured opening, then fitted, sealed and finished by our own team.
05
Showroom Visit
See and operate the systems in person at our Ghaziabad experience centre.
Questions Answered
Aluminium Door Manufacturer: FAQs
What buyers ask most when choosing who to order from.
Who is Alurac?
Alurac Architectural Windoz is an aluminium door manufacturer based on Grand Trunk Road, Bulandshahr Road Industrial Area, Ghaziabad, Uttar Pradesh. The company manufactures aluminium doors and windows, facade glazing, railings, partitions, gates and cladding, shower enclosures and automatic doors, and installs them with its own team.
What is the difference between an aluminium door manufacturer, a dealer and a fabricator?
A manufacturer controls the product from the section onward, supplying profiles, fabricating the unit and installing it. A fabricator buys sections and assembles them but may not install. A dealer sells units made by somebody else. The difference matters when something goes wrong, because a manufacturer cannot pass the problem to another party.
Which types of aluminium doors does Alurac manufacture?
Casement, sliding, tilt and turn, slide and fold, lift and slide, slim profile, automatic, bathroom and shower enclosure doors, along with main gates and entrance leaves. All are fabricated to the measured opening rather than supplied as stock sizes.
Does Alurac install what it manufactures?
Yes. Site survey, measurement, fabrication, installation, sealing and finishing are all handled in house, which keeps one party accountable instead of splitting responsibility between a fabricator, a glazier and a labour contractor.
What should I ask an aluminium door manufacturer before ordering?
Ask for the profile series and wall thickness in writing, the glass build stated as toughened, laminated or double glazed, the hardware brand and grade named, the finish and shade specified, and the installation scope either included or excluded. A manufacturer confident in its specification will put all five on the quotation.
Do you manufacture for builders and dealers as well as homeowners?
Yes. Supply covers homeowners replacing a single opening, builders and contractors ordering project quantities, architects specifying at detail stage, and dealers who sell and fit but do not run a workshop of their own.
Where does Alurac supply and install?
Manufacturing is at Ghaziabad, with supply and installation across Delhi NCR, Uttar Pradesh, Haryana, Rajasthan and Uttarakhand. Project quantities are supplied more widely depending on the scope and dispatch.
Can doors be made to custom sizes and finishes?
Yes. Every door is fabricated to the opening as measured on site, and finishes include powder coating in a wide colour range, anodising, matte, glossy and wood-grain effects rather than a fixed catalogue of shades.
What after-sales support is offered?
Post-installation service, adjustment and maintenance guidance are provided after handover. Because the same team measured, made and fitted the door, adjustments are handled without establishing whose fault a problem is first.
How do I get a quotation?
Share your opening sizes, drawings or a few site photos, along with what the door has to do in terms of noise, heat, privacy and security. A site measurement confirms the real openings, and the quotation is built against those with profile, glass, hardware and installation listed separately.
Looking for a Manufacturer Rather Than a Reseller?
Share your opening sizes, drawings or a few site photos. We will measure on site, recommend the system and glass, then share a quotation with profile, glass, hardware and installation listed separately.
Explore More
Related Pages
The systems we manufacture and the company behind them.